PAL EVEN GLOW - Wet Niche Installation; Installing Fibreglass Light; Sealing Light to Pool Shell; Removing and Installing Light

4 5
WET NICHE INSTALLATION
Removing and Installing Light
WET NICHE INSTALLATION
Installing Fibreglass Light
Twist light anti-
clockwise to remove
from breglass tting
Pull cable through wall.
Assemble components
over cable in order:
To install light,
twist clockwise into
breglass tting
Removing Light Installing Light
1
1
2
2
Final Installation
Sealing Light to Pool Shell
Fibreglass Pool WallFibreglass Nut
½” conduit
PAL Even glow
Fibreglass Light
½” Conduit
Adaptor
1. Washer
2. Nut
Apply silicone to both
sides of pool wall.
Remove excess
silicone after tightning
back body nut.
Firmly tighten by
hand only - do not
over tighten.