Page 8 Get Started
Each handheld must have a unique name
To prevent unexpected results during HotSync operations, possible
data loss, and other complications, each handheld must have a unique
name. If you have upgraded, your new handheld and your old
handheld have the same user name after completing the upgrade
process. We strongly recommend that you perform a hard reset on
your old handheld to erase all data from the old handheld and assign
it a new user name during the next HotSync operation with the old
handheld. See “Performing a hard reset” in Chapter 3 for details.
Using Expansion Features
Your handheld provides an expansion card slot that accepts Secure
Digital (SD) or MultiMedia Card (MMC) expansion cards. These
enable you to add additional software applications or memory. You
can also use an expansion card to back up your data when it is
inconvenient to perform a HotSync operation.
Inserting an expansion card
1. Hold your handheld securely.
2. Insert the card into the expansion card slot, following the direction
indicated by the expansion card icon on the back panel of your
handheld.
3. Use your thumb to push the card into the expansion slot. When
you feel the card lock and hear the system sound, the card is
properly seated within the slot.
To Next Page
Loading...
