10 PALM
®
MicroBeam User Manual - 0202 Z
4.7.4 Remaining Risks – EMV
Regarding interference resistance, the device
meets the protection requirements according to
DIN EN 61000-6-2.
Regarding interference emission, the device meets
the protection requirements according to DIN EN
55011.
Do not operate any devices emitting high-fre-
quency radiation in the same room, where the
PALM
®
MicroBeam is placed.
4.7.5 Remaining Risks – Fire Extinction
To extinguish fire, use sand, carbon dioxide or fire
extinguishing powder. Never ever use water
because of the electric dangers.
4.8 How to Ensure a Safe and Ecological
Disposal
Dispose the following materials in an environmen-
tally friendly way:
- Microscope lamps with incorporated bulb or
individual mercury vapor short arc lamps as
hazardous waste
- Laser as electronic scrap
- Electronics as electronic scrap
- Cables as reusable material
To Next Page
Loading...