Palm MicroBeam - Safety Markings and Type Plate

8 PALM
®
MicroBeam User Manual - 0202 Z
Safety Safety Markings and Type Plate
4.4 Safety Markings and Type Plate
Make sure that the following safety markings and
the type plate exist and are legible. Replace miss-
ing or illegible safety markings or type plate.
Figure 2 Safety Markings and Type Plate
Caution
The safety markings on the device must always
be clearly visible and legible and must strictly
be observed.
P
.
A
.
L
.
M
.
M
i
c
r
o
l
a
s
e
r
T
e
c
h
n
o
l
o
g
i
e
s
Class M1
Identification label