LEARNING THE BASICS
9
Selecting options in a list
Lists let you select from a range of options. You can identify whether
a list is available when you select the field. If a rectangle appears
around the field along with a downward-pointing arrow, a list is
available. Lists are different from the menus described earlier in this
section.
To select from a list, do any of the following:
■ Use the 5-way to highlight the field, and then press Center to
display the items in the list. Press Up or Down to highlight
the item you want, and then press Center to accept your
selection.
■ Use your stylus to tap the arrow, and then tap the item in the list.
■ To exit the list and cancel your selection, press Left .
NOTE When selecting fields you might not see the downward-pointing arrow until you
press Center. In fields where you see a downward-pointing arrow but no rectangle, you
must tap the arrow with the stylus to expand the field.
To Next Page
Loading...
Need help?
General
