Palm Treo - Using Call Waiting; Modes and Alerts

Palm
®
Treo™ Wireless Headset 11
Using call waiting
If your headset has been paired with your phone and you make or
answer a call on your phone while the headset is turned off (or is out of range of
the phone), when you turn on your headset (or bring it into range of the phone), it
automatically tries to connect to the call. If the headset does not automatically
connect to the call when you turn it on (or come back into range of your phone),
quickly press the multifunction button to connect.
Using call waiting
To use the call waiting feature, press the button on your phone to switch to the
incoming call—typically the Send button.
You can also use the call waiting enhanced feature, described later in this guide, if
it is supported by your phone.
Modes and alerts
Your headset works in several different modes, each with its own types of alerts.
0
Name Definition Sounds Indicator light
Active mode When you are
currently on a call*
None One long flash
every eight
seconds
Mute mode Turns your
headset’s
microphone off**
Single tone
every 15
seconds when
microphone is
off
Flashes every
eight seconds
NOTE