Palm Tungsten E User Manual

Your handheld does not turn on when you press the power button, or
your handheld does not respond when you tap it
1. Press the Calendar, Contacts, Tasks, or Note Pad button to
see if you can turn on your handheld that way.
2. Perform a soft reset: Unscrew the top of the stylus to reveal
the reset tool (or use an unfolded paper clip or similar
object without a sharp tip). Gently press the reset button
inside the hole on the back panel of your handheld.
3. Make sure the power adapter is plugged securely into a
working electric outlet and is firmly connected to the
handheld. (If no outlet is available, your handheld can also
be charged through the USB cable, but this takes much
longer.)
Note: Your handheld does not have an indicator light to indicate that your handheld is being
charged.
4. Charge for another three full hours.
5. If your handheld now turns on, check the charging-battery icon to ensure that your handheld is
being charged. Example:
a. Connect the handheld to an outlet and turn it on.
b. Tap Home .
c. Look for the lightning bolt on the battery icon at the top of the screen.
d. If you do not see the lightning bolt, repeat steps 3 and 4.
For more information, go to www.palm.com/support/intl.
TROUBLESHOOTING
Reset
button

Palm Tungsten E Specifications

General

I/O ports	USB
Internal memory	0.032 GB
Built-in processor	OMAP311
Processor frequency	0.126 GHz
Display resolution	320 x 320 pixels
Display number of colors	65536 colors
Compatible operating systems	Palm OS Version 5.2.1
Audio system	stereo
Bundled software	DataViz Documents to Go v6, RealOne Mobile Player, Kinoma Player and Producer, Acrobat Reader, powerOne personal calculator, Palm Reader, Handmark Magic Dogs, Handmark Mobile DB, Handmark PDA Money, VersaMail v2.6, Telephony/SMS, Phone Link, Phone Link Updater, Palm Dialer
RFID reader	No

Weight and Dimensions

Depth	12 mm
Width	79 mm
Height	114 mm
Weight	131 g