3.
Charge your Palm V
™
connected organizer
Before you use your new Palm V™ organizer, you need to connect the cables and
charge it for four hours. Afterwards, it takes only a few minutes a day to recharge
it during regular use.
Insert the AC adapter cable
into the back of the cradle connector,
and then turn off your computer.
Connect the cradle to a COM
(serial) port on your computer, and then
plug the AC adapter into a wall outlet.
Charge your organizer by placing
it in the cradle and making sure the
cradle light is on. As your organizer
begins its 4-hour charge, you can
continue with the set up process.
1.
2.
Cradle light
If necessary, use the included
serial port adapter.
To Next Page
Loading...
