Palmer PWT05 - Features; Included Cables; Specifications

FEATURES
•This power supply is capable of powering far more than five normal ef-
fects units (which normally have a power consumption of approx. 20 mA).
•Compact, rugged housing
•IEC socket
•Input voltage selection switch
•Power switch.
•5 isolated outputs, isolated means that you will not encounter any ano-
ying ground loop huming
INCLUDED CABLES
•The PWT05 comes with a wide selection of connection cables
•5x Short DC cables (approx. 30cm long)
•5x Long DC cables (approx. 60cm long)
•1x Daisy chain cable (connect up to 5 devices to one output of the
PWT05)
•1x Special Y-Cable for current doubling (use this cable to combine two
outputs to attain double the current at 9V)
SPECIFICATIONS
Product type: power supply
Type: multiple power supply
Mains connector: IEC mains cord
Input voltage: 230 V ~ 50 Hz, 115 V ~ 60 Hz
Outputs: 5
Output connectors: 2.1 x 5.5 mm
Output voltage: 9 V V
Max. output current: each output 125 mA
Isolated outputs: yes
Polarity: center negative
Cord length: 25 - 50 cm
Display: Power
Controls: mains voltage selector, Power
Dimensions [W x D x H]: 105 x 105 x 40 mm
Weight: 0,96 kg
Since all our products are constantly controlled and improved, techni-
cal changes are possible without prior notice.
8
EN ENDE ES