Important before you start
unpacking
Please read this quick start guide carefully before unpacking the boards from their
antistatic bags or using the kit, as it contains important information on how to avoid
damage to the PCB’s.
Customer support
Questions regarding the contents of this document or the products described in this document can be
directed to PalmSens BV via:
- the contact form on the website: www.palmsens.com
- an email to info@palmsens.com ,
- or by telephone: +31 30 2459211
Information contained in this publication regarding device applications and the like is
provided only for your convenience and may be superseded by updates. It is your
responsibility to ensure that your application meets with your specifications.
PALMSENS BV MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND
WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE,
RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE.
PalmSens BV disclaims all liability arising from this information and its use. Use of
Palmsens BV’s products as critical components in life support systems is not
authorized except with express written approval by Palmsens BV. No licenses are
conveyed, implicitly or otherwise, under any Palmsens BV intellectual property rights.
The EmStat board can be damaged by static electricity (electrostatic
discharge or ESD). Please take adequate precautions against static
discharge during handling.
To Next Page
Loading...
Need help?
General