Need help?Do you have a question about the Palstar AT1500CV and is the answer not in the manual?
Palstar Inc. warrants products to be free from defects in material and workmanship under normal use.
Details on sending products for service, including packaging, insurance, and service rates.
Pre-operation checks and switch settings for the AT1500CV before applying transmitter power.
Procedure for tuning the antenna using the AT1500CV, including band and frequency selection.
Dual needle meter displaying forward and reflected power, and SWR measurement.
Switch to select power display range for the meter (300W or 3000W).
Description of the 26 uH roller inductor and its adjustment mechanism.
Description of the continuously adjustable output capacitor control.
Description of the continuously adjustable input capacitor control.
Six-position switch for selecting antenna output mode (bypass or tuned).
Instructions for carefully removing and inspecting the AT1500CV for shipping damage.
Guidance on selecting a suitable location for the AT1500CV for optimal operation and cooling.
Steps for connecting transmitter, antenna, and dummy load to the AT1500CV.
To Next Page
General
