To Next PageTo Next Page
Need help?Do you have a question about the Palstar AT4K and is the answer not in the manual?
Key safety warnings regarding electrical shock, fire, and moisture hazards.
Instructions on reading, retaining, heeding, and following operating procedures.
Safety for cleaning, water exposure, ventilation, and proper product placement.
Guidelines for grounding, power sources, and power-cord protection.
Advice on unplugging the unit during lightning storms or long periods of disuse.
Details Palstar's one-year warranty against material and workmanship defects.
Outlines the procedure and costs for product repair services.
Specifies conditions and fees for returning purchased products.
Detailed instructions for properly grounding outdoor antenna systems for surge protection.
Covers servicing, damage, replacement parts, and safety checks by qualified personnel.
Safety regarding power lines, overloading, and preventing object/liquid entry.
Details on metering, input/output tuning, inductance, and selector switches.
Covers connectors, frequency range, power, impedance, dimensions, and materials.
Explains the AT4K's impedance matching network, T-circuit, and SWR measurement capabilities.
Troubleshooting advice for spitting sounds indicating low impedance tuning.
Guidance on managing high voltages and losses related to capacitance settings.
Instructions for unpacking the unit and selecting a suitable operating location.
Steps for connecting transmitter, antenna, and power adapter.
Description of the dual needle meter for forward and reflected power.
Explanation of switches for direct/tuned modes and antenna output selection.
Comprehensive explanation of all front panel knobs, buttons, and indicators.
Visual representation of the AT4K's internal electronic components and connections.
Steps to take before applying transmitter power for the first time.
Step-by-step guide for tuning the antenna using the AT4K controls.
Table showing maximum power output based on different antenna impedance values.
Instructions for adjusting meter board controls for calibration and accuracy.
General| Impedance | 50 Ohms |
|---|---|
| Tuning Range | 1.8 to 30 MHz |
| Frequency Range | 1.8 to 30 MHz |
| Output Power | 1500 Watts PEP |
| Type | Antenna Tuner |
