To Next PageTo Next Page
Need help?Do you have a question about the Palstar AT2K and is the answer not in the manual?
Key safety warnings regarding fire, electrical shock, moisture exposure, and user-serviceable parts.
Essential operating guidelines covering reading instructions, handling, cleaning, ventilation, grounding, and power sources.
Further safety measures for power lines, overloading, liquid entry, servicing, replacement parts, and outdoor antenna grounding.
Overview of the AT2K's design, impedance matching, metering capabilities, and key components like the roller inductor.
Instructions for unpacking the AT2K, inspecting for damage, and choosing an appropriate installation location.
Steps for connecting transmitter, antenna, and dummy load cables, with warnings about RF voltages.
Detailed illustration and explanation of the AT2K's rear panel connectors for RF input, outputs, and power.
Detailed explanation of front panel controls and meters, including power/SWR meter, peak hold, range, and inductor.
Explanation of front panel switches like DIRECT/TUNED mode and OUTPUT/INPUT capacitors, and indicators.
Schematic diagram of the AT2K Antenna Tuner, showing internal components and connections.
Pre-operation checks and initial tuning settings for different bands, including suggested control values.
Step-by-step guide for tuning the AT2K for optimal SWR, with notes on acceptable SWR and feedline adjustments.
Guidance on regular maintenance of the roller coil and re-tuning procedures for different antennas.
Detailed technical specifications of the AT2K, including frequency range, power, impedance, dimensions, and materials.
Details of the one-year limited warranty for material and workmanship defects under normal use.
Information on the repair policy, product return procedures, service rates, and shipping responsibilities.
Instructions for adjusting meter board pots to ensure accurate calibration of the AT2K metering.
Photograph identifying key internal components of the AT2K Antenna Tuner, such as capacitors and inductor.
A section reserved for user-added notes or observations regarding the operation of the AT2K.
General
