Panacom SP-3412 - Connecting a Smartphone with One Touch(NFC); Sp-3412

Pg. 8
CONNeCTINg A smArTphONe wITh ONe TOUCh(NFC)
When you touch the system with an NFC-compatible smartphone, the system auto-
matically:
-Turns on in wireless function.
-Completes pairing.
-Completes the wireless connection
1. Turn on the unit and switch to WI mode, the wireless light ashing.
2. Turn on the NFC function in your smartphone setting.
3. Touch the smartphone to the NFC mark on the control panel until the smartphone
vibrates.
When the wireless connection is established, the wireless indicator stops ashing and
remains light up.
Remark: The unit should have been connected with the smartphone by wireless con-
nection before using the one touch( NFC) function. For details, refer to the operating
instruction of wireless connection.