Menu list
To access the features, there are 2 methods.
Handset / Base unit
n Scrolling through the display menus
1 MMENUN
2 Press MCN or MDN to select the desired main menu. a MSELECTN
3 Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN
4 Press MCN or MDN to select the desired setting. a MSAVEN
n Using the direct command code
1 MMENUN a Enter the desired code.
Example: Press MMENUN#101.
2 Select the desired setting. a MSAVEN
Note:
R The unit column shows the unit(s) that can be used to program the item.
: Only the handset can program the item.
: Only the base unit can program the item.
/ : Both the handset and base unit can program the item.
R To exit the operation, press MOFFN on the handset or MEXITN on the base unit.
R In the following table, < > indicates the default settings.
R In the following table,
indicates the reference page number.
R Display menu order and sub-menu may vary depending on your model.
R The menu list shows the handset displays, so the base unit displays may differ from displays in this list.
Display menu tree and direct command code table
Main menu:
“Phonebook”
Operation Code Unit
Viewing the phonebook entry. #280
/
33
Main menu: “Caller list”
Operation Code Unit
Viewing the caller list. #213
/
47
Main menu:
Handset: “Answering device” a MbN: “Line1” or “Line2”
Base unit:
“Answer device” a MbN: “Line1” or “Line2”
Sub-menu 1 Sub-menu 2 Settings Code Unit
Play new message
– –
#3231
*1
56
#3232
*2
Play all message
– –
#3241
*1
56
#3242
*2
37
Programming
To Next Page
Loading...
