C Connect the AC adaptor cord and
telephone line cord.
3 Insert the lower tabs of the adaptor into the
unit’s bottom slots (A), then insert by pushing
down the levers of the adaptor into the upper
slots (B).
R The words “UP WALL” should be facing up.
4 Mount the unit on a wall then slide down to
secure in place.
R This product is compliant with the following
wall phone plate sizes (2 types).
102 mm (4 inches)
Fit the slots of the unit onto the
corresponding wall phone plate tabs for
(
TG9541C(en)_0723_ver012.pdf 63 2013/07/23 12:24:56