Default Setting
IMPORTANT
We recommend configuring these settings with your administrator or dealer. Contact your administrator or
dealer for further information.
Setting Description Value Range Default
Factory Setting Reset all settings to their
factory-shipment state.
— —
IP Reset Reset the following settings to their
default values:
• Network Settings (Page 43)
For details about the Web settings
that are reset, consult your
administrator or dealer.
— —
Restart
Setting
Description Value Range Default
Restart Restart the unit (Page 71). — —
Firmware version
Setting
Description Value Range Default
Firmware version View the version of the currently
installed firmware. If a newer version
is available, its version is also
displayed. In this case, press
to update the firmware.
— —
Note
• Your phone system dealer may offer new features or an improved version of the unit's software from
time to time. If you set the unit software update setting to manual mode through the Web user interface,
you need to download the update when "Update version. Press OK." is displayed. Contact your
administrator or dealer for further information.
46 Operating Instructions Document Version 2011-10
Customizing the Telephone
To Next Page
Loading...
