Installation and Setup
Notice
• Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of
improper installation or operation inconsistent with this documentation.
Attaching/Removing the Stand
Attaching the Stand
For KX-UT133/KX-UT136/KX-UT248:
1. Insert the catches (
) of the stand into hooks located in the unit.
2. Gently push the stand in the direction indicated until it locks into place.
The stand will be mounted in the high position.
For KX-UT113/KX-UT123:
1. Insert the catches of the stand into hooks located in the unit.
2. Gently push the stand in the direction indicated until it locks into place.
The stand will be mounted.
Removing the Stand
For KX-UT133/KX-UT136/KX-UT248:
1. Hold the stand with both hands.
Document Version 2011-10 Operating Instructions 57
Installation and Setup
To Next Page
Loading...
