Panasonic 96NKX-UT248

Icon Description
ECO
Displayed when Eco mode is enabled (Page 40).
Displayed when registration to the SIP server has been lost. If this icon is
displayed, consult your administrator or dealer.
Soft Buttons and Soft Button Icons
By pressing a soft button (S1 to S4), you can access the function displayed directly above it.
Setting
Call Log
S1 S2 S3 S4
In this manual, soft buttons are referred to by their corresponding icons.
In the example here, "Press
Setting
", "Press
Call Log
", or "Press " would indicate pressing S1, S2, or S3,
respectively.
Icon
Description
Setting
Access the user setting menus (Page 37).
Call Log
Access the call log (Page 25).
Access the phonebook (Page 35).
Setup
Access the setup menus (Page 70).
Clear
Erase the number or character above the cursor (Page 25).
Search
Search for a phonebook entry (Page 25).
Menu
Edit a call log or phonebook entry (Page 26, Page 35).
OK
Confirm a transfer operation (Page 30).
Begin installation of a firmware update (Page 46).
Enter
Save or confirm the information shown on the display.
Note
• You can also use the physical ENTER button to perform the same
operation as this soft button.
Answer
Answer an incoming call (Page 23).
Document Version 2011-10 Operating Instructions 21
Before Operating the Telephone