Panasonic AG-AC130A - Page 41

41
Shooting
6
When the following screen is displayed, use
the OPERATION lever to set a six-character
file name.
Perform this using the same method as setting
user information (Page 49).
•
Characters that can be set
(Space), A-Z, 0-9, :< = > ? @ [ ] ^ _ - . /
When setting the le name, press the
<RESET/TC SET> button to clear the
characters.
7
When finished setting the file name, push
the OPERATION lever.
8
Select [YES] on the confirmation screen.
•
When you select [YES], you will exit the
[NAME EDIT] screen and the setting change
completes.
•
Once the setting change has been completed,
the changed name and values are stored
and they remain after turning off the power or
changing the scene dials.