55
Playback
Resume playback [RESUME PLAY]
Use this setting to play back from where a clip had
previously been paused.
1
Press the <MENU> button.
Menu operation (Page 28 of Vol. 1)
2
Set the [RESUME PLAY] item in the [PLAY
SETUP] screen to [ON].
3
Press the <MENU> button to return to the
thumbnail screen.
4
Select a clip for playback.
If playback has previously been paused, the
resume playback indicator will be displayed on
the clip thumbnail, and the remainder of the clip
will be played the next time the clip is selected
for playback.
•
To turn the resume playback setting [OFF],
select [OFF] in step
2
.
•
If you turn OFF the power or switch to
<CAMERA> mode, the video position that
was being played is canceled. (Playback will
start from the beginning of the last clip.)
Setting the skip method [SKIP MODE]
(only in AVCHD mode)
Select which skip (cue) operation is to be
performed when playback is paused.
1
Press the <MENU> button.
Menu operation (Page 28 of Vol. 1)
2
Select the [SKIP MODE] item in the [PLAY
SETUP] screen.
3
Select the skip method.
[CLIP]:
Move to the beginning of the previous or next
clip by tilting the OPERATION lever in the
<
> or < > direction while playback is
paused.
[CLIP & INDEX]:
Move to the beginning of the previous or next
clip, or to the previous or next INDEX position,
by tilting the OPERATION lever in the <
> or
<
> direction while playback is paused.
4
Press the <MENU> button to return to the
thumbnail screen.
To Next Page
Loading...
