80
Item
Display
mode
Description of settings
[CHROMA
LEVEL]
<CAMERA>
Adjusts the chroma level.
[-7]
…
[0]
…
[+7]
[CHROMA
PHASE]
<CAMERA>
Adjusts the chroma phase.
[-7]
…
[0]
…
[+7]
[COLOR TEMP
Ach]
<CAMERA>
Make ne adjustments to the color temperature (after white balance Ach
adjustment).
[-7]
…
[0]
…
[+7]
[COLOR TEMP
Bch]
<CAMERA>
Make ne adjustments to the color temperature (after white balance Bch
adjustment).
[-7]
…
[0]
…
[+7]
[MASTER PED] <CAMERA>
Adjusts the master pedestal (black level of the image) as the basis for images.
[-15]
…
[0]
…
[+15]
[A.IRIS LEVEL] <CAMERA>
Sets the desired AUTO IRIS level.
[-6]
…
[0]
…
[+6]
[DRS] <CAMERA> Selects the [DRS] (dynamic range stretcher) function.
[ON]: Enables the [DRS] function.
[OFF]: Disables the [DRS] function.
•
If you assign the [DRS] function to the USER button, pressing the USER
button switches it ON/OFF.
[DRS EFFECT] <CAMERA>
Selects the level of the [DRS] (dynamic range stretcher) function.
It enables the dynamic range to be expanded by compressing the level of the
video signals in the high-brightness areas where overexposure results during
normal shooting.
[1], [2], [3]
•
The higher the number of the setting, the higher the compression level of the
high-brightness areas.
[GAMMA] <CAMERA> Selects the gamma curve.
[HD NORM]: This gamma setting is suitable for HD shooting.
[LOW]: Makes a mellow image using the gamma curve that has a
gentle incline in low-brightness curve. The contrast sharpens.
[SD NORM]: This is the normal video setting carried over from
Panasonic
AG-DVX100 series.
[HIGH]: Expands the tone of dark parts and makes a brighter image
using the gamma curve that has a sharp incline in low-
brightness curve. The contrast softens.
[B.PRESS]: Makes the contrast sharper than LOW.
[CINE-LIKE D]: Uses a gamma curve designed to create cinema-like images.
[CINE-LIKE V]: Uses a gamma curve designed to create cinema-like images
with emphasized contrast.
•
When you select [CINE-LIKE] gamma, we recommend setting the lens
aperture lower than normal image level (approximately 1/2) for optimal results.
is the factory default mode for the <SCENE FILE> dial <F1>.
To Next Page
Loading...
