Panasonic AG-CVF10G - Adjusting the Viewfinder; Attaching The Viewfinder

E-8
ENGLISH
Attaching the viewnder
1ConrmthatthePOWERswitchofthecamerais“OFF”.
2ConnecttheplugoftheconnectingcabletotheVFconnectoronthecamera.
Note
WhenconnectingtheplugoftheconnectingcabletotheVFconnectoronthecamera,push
itrmlyinalltheway.
Viewnder left-right
position anchoring ring
Loosen the ring.
3Loosentheviewnderleft-rightpositionanchoringringofthecamera.
4Loosenthescrewoftheslidestopper,andthenattachtheviewnderbyslidingitin
thedirectionofthearrow.
Afterattachingtheviewnder,tightenthescrewoftheslidestopper.
Slide stopper
Tighten the screw of
the slide stopper.
Tighten the ring.
5Tightentheviewnderleft-rightpositionanchoringringofthecamera.
Adjusting the viewnder