The following description is for AG-CX7/8/10EN.
Some descriptions may differ depending on model suffix.
The page number in this chapter does not show the page number of this service manual.
Description of parts
21
(ENG) DVQX2032
Description of parts
Main unit
≥ The illustrations in this document show the handle unit (supplied) removed.
1
Lens hood
2
Lens cover switching lever
Opens/closes the lens cover.
3
Focus ring (l 46)
When the <FOCUS A/M/¶> button is
pressed to set to manual focus mode
([MF]) you can focus manually.
4
Rear ring (l 45)
You can manually perform zoom
operations, adjust the iris (the lens stop),
and adjust the AE level (exposure
compensation).
≥You can switch the function to be
adjusted by setting with the menu,
pressing the USER button assigned to
[REAR RING], or touching the USER
button icon.
5
<ND FILTER> switch
Selects the ND filter to suit the
illumination of the subject.
<1/64>:
Reduces the amount of light entering the
MOS sensor to 1/64.
<1/16>:
Reduces the amount of light entering the
MOS sensor to 1/16.
<1/4>:
Reduces the amount of light entering the
MOS sensor to 1/4.
<CLR>:
Does not use the ND filter.
6
<FOCUS A/M/¶> button (l 46)
Select the focus function.
To Next Page
Loading...
