Chapter 4 Operation — Menu settings
- 80 -
[FILE SPLIT]
Selects the split method of the file in P2 format to be recorded.
The items that can be selected are as follows.
≥ [ONE FILE], [SPLIT]
(Factory setting: [SPLIT])
0
When using a microP2 card with 32 GB or less, it is split every 4 GB regardless of selected item. During proxy recording, the proxy data is split the same way.
0 A clip of 4 GB or more recorded by selecting [ONE FILE] cannot be copied to a microP2 card with 32 GB or less.
0 When the recording format is AVC-I100/AVC-I50, this is fixed to [SPLIT].
[2 SLOTS FUNC.]
Sets the recording function that uses 2 memory cards.
(Factory setting: [RELAY REC])
[PRE REC]
Sets whether to perform pre-recording. (l 129)
The items that can be selected are as follows.
≥ [ON], [OFF]
(Factory setting: [OFF])
[PROXY REC]
Sets whether to perform proxy recording. (l 133)
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [OFF])
[REC FUNCTION]
[REC MODE]
Selects the recording mode.
(Factory setting: [NORMAL])
[INTERVAL TIME]
Sets the interval duration for interval recording.
The items that can be set are as follows.
≥ [1s], [2s], [5s], [10s], [30s], [1min], [5min], [10min]
(Factory setting: [5min])
[TC/UB]
[TC PRESET]
Sets the default value of the time code to record.
(Factory setting: [00]) (each item)
≥ “h” is an abbreviation for hour, “m” for minute, “s” for second and “f” for frame.
[UB PRESET]
Sets user bits.
Enabled only when [USER] is selected in [UB MODE] of [TC/UB].
Each digit can be set in following range.
≥ [00]…[FF]
(Factory setting: [00])
[OFF] Does not set.
[RELAY REC] Sets to the relay recording. (l 129)
[SIMUL REC] Sets to the simultaneous recording. (l 130)
[BACKGR REC] Sets to the background recording. (l 131)
[NORMAL] Performs the standard recording.
[INTERVAL] Performs the interval recording. (l 132)
Hour [00]…[23]
Minute [00]…[59]
Second [00]…[59]
Frame [00]…[23] (when [23.98p])
[00]…[24] (when [50.00i], [50.00p], or [25.00p] is set)
[00]…[29] (when [59.94i], [59.94p], or [29.97p] is set)
To Next Page