Attaching accessories
37
(ENG) DVQX2103
2 Attach the microphone holder to the microphone holder mounting section on
the handle unit.
≥ Attach using a commercially-available screwdriver.
≥ There will be some rubbing noises with the rubber
when screwing in the microphone holder mounting
screws, but please ensure they are done up tightly.
1 Microphone holder
2 Microphone holder mounting screws
3 Push the handle unit into the handle unit
mounting section on the camera.
Match the positions of mounting mark A on the
handle unit and mounting mark B on the camera
when pushing in.
AG-CX7_CX8_CX10-DVQX2103_eng.book 37 ページ ２０２０年１月６日 月曜日 午後２時４８分
To Next Page
Loading...
