Preparing the memory card
41
(ENG) DVQX2103
Removing the memory card
1 Open the card slot cover.
≥ Confirm that the card access lamp is not flashing in orange.
≥ Data is being written/loaded when the card access lamp is flashing in orange, so do not
remove the memory card.
2 Press in the memory card further into the main unit and let go.
≥ Pull the memory card straight out when it is released from the card slot.
3 Close the card slot cover.
AG-CX7_CX8_CX10-DVQX2103_eng.book 41 ページ ２０２０年１月６日 月曜日 午後２時４８分
To Next Page
Loading...
