Panasonic AG-DV2500P - Rear Panel Terminals and Switches

1-3
DV/CPU board
assembly
MDA/DC board
assembly
1.4 HOW TO EXAMINE THE BOARDS
1.4.1 MAIN board assembly
(1) Remove the bottom cover to examine the B-side of the main
board.
Fig. 1.4.1 (1)
(2) Remove the four screws to examine the A-side.
(3) Remove the two screws on the rear cover.
(4) Pull down the main board as shown in fig. 1.4.1 (3).
Fig. 1.4.1 (2)
Fig. 1.4.1 (3)
1.4.2 MDA/DC board assembly
(1) Remove the top cover to examine the A-side.
(2) To examine the B-side, pull down the main board as shown
in Fig. 1.4.2 (2).
Fig. 1.4.2 (1)
Fig. 1.4.2 (2)
Main board
assembly
REAR COVER
MAIN board
assembly
Keep a distance to a minimum from the unit,
because this FFC cable may be damaged.
MDA/DC board
assembly
1.4.3 DV/CPU board assembly
(1) Remove the top cover as shown in Fig. 1.4.2 (1) to examine
the DV/CPU board.
3
3
3
4
4