1-7
1.8 SERVICE MENU
1.8.1 How to display the Service Menu
1.8.2 How to operate the Menu
In no cassette condition, by pressing the MENU button for 2 seconds or longer while keeping either the REC or PLAY button
pressed, the first tier of the Service Menu will be displayed on the video monitor . As shown in Table 1.8.1, the Service Menu
content that is displayed will dif fer depending on which buttons you press together simultaneously.
1
Press the or button on the front panel to move the cursor to the mode you want to change.
Press the [SET] (or button) to select the item.
Press the or button to change the parameter.
When finished making the change, press the [SET] button. The parameter stops blinking when the change has been confirmed.
(Returning using the button or [MENU] button causes the setting to revert to the status prior to the change.)
When all settings are completed, move the cursor to “P AGE BACK” and press the [SET] button to return to the MENU screen.
* If the button is pressed when the parameter is not blinking, it returns to the main screen.
* If the [MENU] button is pressed, it returns to the normal screen.
Table 1.8.1 Service Menu First Tier List
Fig. 1.8.1 (1) Front Panel
Fig. 1.8.2 (1) Menu Screen
(with REC pressed simultaneously)
Fig. 1.8.2 (2) Menu Screen
(with PLAY pressed simultaneously)
MENU button
STOP [ ] button
REW [ ] button
PLAY [ ] button
FF [ ] button
VTR1 MENU
VTR2 MENU
DIP SW
HOUR METER
ERROR HISTORY
OTHERS
CPU VERSION
VCR 1 Menu
VCR 2 Menu
DIP SW Menu
Hour Meter
Warning History
MENU SAVE etc.
CPU Version
Item Displayed Content
Activation Method
REC PLAY
VTR1 . .
– – – M E N U – – –
EX I T
CPU VERS I ON
SYS 0001
VTR 0102
VTR1 . .
– – – M E N U – – –
VTR2 . .
DIP SW. .
HOUR METER . .
ERROR H I STORY . .
OTHERS . .
EX I T
SET
MENIU
EJECT
REC PLAY
PAUSE
REW
STOP
FF
DVCAM NTSC
PA L
REC INH.
CH-1/3
CH-2/4
A.DUB
OPERATE
INPUT SEL.REMOTE SEL.
MIC
SERIAL
WIRELESS
9PIN
LINE
DV
Y/C
2
3
4
5
To Next Page
Loading...
