15
5. Check input & output levels:
6. On left side of unit, press the “Input level” – key until input level is set to minimum value of 0. The
screen temporarily reads 1 / 2 input level: 0
• Press the RECORD button once to enter “record ready” so you can set levels with mixer
• Press RECORD again to begin recording (counter rolls, and •|| turns to
•
)
• Press Home button to stop recording (counter resets to
00:00:00)
There is a PEAK led on the right front of the unit that shows when you are recording TOO LOUD!
The meter shows the recording level (you should be recording at least to the – 12 tick mark)
7. On front of unit, press + or – keys to set playback level
to four units down from max (which is unity gain from input
to output).
The screen temporarily reads Vol
To Next Page
Loading...
