Panasonic AG-HMC150 - Tascam DR-40 Recording Instructions

14
TASCAM DR-40 RECORDER
RECORDING INSTRUCTIONS
BEFORE you turn the DR-40 on, check:
1. On left side of unit (near headphone jack), EXT IN should be set to LINE (far left)
2. HOLD switch should be set to right (otherwise you can’t use any buttons)
SET TO LINE
SET TO THE RIGHT
3. To turn unit ON or OFF, hold the [O/I
Home] button for 3 seconds
4. A screen will ask to select BUS POWER
or STORAGE. Choose BUS POWER by
pressing Enter