FOCUS SETTING:
Check the focus seng.
Automac (A) will focus on the closest object
in the center of the eld of view.
Manual (M) will allow the user to focus the
camera using the outer ring when the ring
selecon switch is set to FOCUS.
In this picture, the Outer ring on the camera would control the IRIS.
WHITE BALANCE:
At the front of the camera, just underneath
the lens, you will nd the Auto White Balance
(AWB) buon.
Point your camera at a white source, zoom in
to ll the frame, then hold the AWB buon
down.
When you see ABB ACTIVE, the white balance
has been set.