Panasonic AG-HMC150P - Iris Control

C
IRIS CONTROL:
Pushing the Iris buon will switch between Manual Iris and Auto Iris.
Auto Iris will set the camera to automacally adjust the iris depending upon the
light available within the eld of view.
Manual Iris will allow you to adjust the iris.
When in Manual Iris mode, the wheel to the le of the buon will control the iris.
Seng the Iris - Zebra Stripes
Zebra stripes appear on areas of the image that are overexposed. In those areas,
no detail is recorded because the light is too intense.
A picutre is properly exposed when there are no, or very few, zebra striped areas
in the image.
Do not rely on how the image “looks” in the LCD monitor to determine correct
exposure because the LCD monitor shows brightness inaccurately. Always use
zebra stripes.
Push the ZEBRA Buon unl
ZEBRA2 100% appears in the LCD moni-
tor.
Now use the dial to close the iris unl
the zebras are nearly gone.