54
Recording
Use this function when the light is emanating
from behind the subject and the subject appears
dark.
¬ Rotate the mode dial to select .
1 Press the center of the cursor
button. Then press the down
button to display the icon shown
in the illustration.
2 Press the up button of the cursor
button to select [ ].
The image on the screen will become
brighter.
To return to normal recording
Select [ ] again.
≥If you turn off the power or operate the mode
dial, the backlight compensation function is
canceled.
Fade in: The image and audio gradually
appear.
Fade out: The image and audio gradually
disappear.
¬
Rotate the mode dial to select .
1 Press the center of the cursor
button. Then press the down
button to display the icon shown
in the illustration.
2 Press the left button of the
cursor button to select [ ].
3 Press the recording start/stop
button.
Start recording. (Fade in)
When you start recording, the image/audio
gradually appears.
Backlight compensation
function
This is for preventing a backlit subject
from being darkened.
Fade in/fade out function
VQT1R33(E).book 54 ページ ２００８年３月６日 木曜日 午後４時３３分
To Next Page
Loading...
