55
Recording
4 Press the recording start/stop
button.
Pause recording. (Fade out)
The image/audio gradually disappears. After the
image/audio completely disappears, recording
stops.
≥After recording, the fade setting is canceled.
To cancel fading
Select [ ] again.
The colour which appears in fading pictures can
be selected.
Press the MENU button, then select
[VIDEO]
# [FADE COLOUR] #
[WHITE] or [BLACK]
and press the
center of the cursor button.
≥If you turn off the power, the fade function is
canceled.
≥While the fade in/fade out function is selected,
it takes several seconds to display the image
when you start recording. It also takes several
seconds to pause recording.
≥The thumbnails of scenes recorded using fade
in become black (or white).
Reduces the image shaking (jitter) due to hand
movement when recording.
¬
Rotate the mode dial to select .
Press the MENU button, then select
[BASIC]
# [O.I.S.] # [ON] and press
the center of the cursor button.
To cancel the image stabilizer function
Press the MENU button, then select [BASIC] #
[O.I.S.] # [OFF] and press the center of the
cursor button.
≥This function’s default setting is [ON].
≥In still picture recording mode, pressing the
PHOTO SHOT button halfway increases the
effect of the image stabilizer function. (MEGA
optical image stabilizer)
≥In the following cases, the image stabilizer
function may not work effectively.
– When the digital zoom is used
– When the unit is shaken greatly
– When you record a moving subject while
tracking it
To select the colour for fade in/out
Image stabilizer function
This is for reducing image shakes
(jitter) during recording.
VQT1R33(E).book 55 ページ ２００８年３月６日 木曜日 午後４時３３分
To Next Page
Loading...
