11
HD-SDI output
6
Example of system configuration for SDI mode
When outputting data in the portable recorder’s recording format ■
Select [SDI EE SEL] → [NORMAL] in the [AV OUT SETUP] setup menu.
Using the setup menus (Page 29)•
HD-SDI input signal
External monitor
AG-HMR10 (portable recorder)
HD-SDI output signal
Camera-recorder
Data such as information in the OSD and menu screens can be added to the output signal.•
(When [OUTPUT OSD] → [ON] is selected in the [DISPLAY SETUP] setup menu.)
S-VITC/UMID information is not output.•
Use when performing checks on an external monitor.•
When outputting the input data unchanged
■
Select [SDI EE SEL] → [THROUGH] in the [AV OUT SETUP] setup menu.
Using the setup menus (Page 29)•
HD-SDI input signal
External device, such as
a recorder
AG-HMR10 (portable recorder)
HD-SDI output
signal
Camera-recorder
The HD-SDI input signal is output unchanged.•
Use when recording or editing is required on the output device.•
In PB mode, the setting switches automatically to [NORMAL].•
To Next Page
Loading...
