[STX] QLH:m [ETX]
Parameters
m = D: Cumulative drum rotation
time
T: Cumulative capstan rotation
time
No parameter:
Cumulative drum rotation
time (4 digits)
[STX] LHRdata [ETX]
data = mhhhhh
m = D: Drum
T: Capstan
hhhhh = 00000
99999:
Cumulative rotation time
O
With no parameter
The drum’s cumulative rotation time
is returned as a 4-digit value.
data = hhhh
hhhh = 0000
9999:
Cumulative rotation time
Queries the current value of the hours meter.
[STX] QOT [ETX] [STX] OTEm [ETX]
m = E:
E-E (Electric modulation to Electric
play back)
m = T:
V-V (VTR to VTR recording)
Queries whether to set to the E-E output or V-V output
when the VTR is in the STOP mode, FF mode or REW
mode.
58
RS-232C
$
Query control commands
Sends data of computer Return data from VTR Description of command
[STX] QIE [ETX] [STX] IEVdata [ETX]
data = m1m2
m1 = 0
F: Designates the data of bit 7
to bit 4.
m2 = 0 F: Designates the data of bit 3
to bit 0.
Queries the forced E-E output setting.
Parameter m1 (HEX display) m2 (HEX display)
Bits supported BIT7 BIT6 BIT5 BIT4 BIT3
Switching data 0000AUDIO CH1
BIT2
AUDIO CH2
BIT1
VIDEO
BIT0
TC
To Next Page
Loading...
