Panasonic AJ-HDC27H - Monitor Set up

UNDERSTANDING PANASONIC AJ-HDC27H
© ALLEN YEUNG 2008
8 / 12
UG_AJ-HDC27H_v1.doc
Time-code Reset (P.66)
1. Make sure DISPLAY switch(6@P.21) is TC
2. Set TCG switch(9@P.21) to SET
3. Press RESET button(5@P.21)
4. If necessary, use SHIFT and “+” ”-“ to assign time-code
5. Set TCG switch(9@P.21) to R-RUN
Monitor Setup (BT-LH900p)
2
Pre-adjustment
1. Factory Default (P.19 – Monitor OM)
SYSTEM CONFIG =>
USER MODE LOAD => FACTORY
2. Film Gamma Select (F.REC) (P.18 Monitor OM)
VIDEO CONFIG =>
GAMMA SELECT => FILM
*Normal for Video Menu or Film Menu (V.REC)