E-12
ENGLISH
Diopter Adjustment
Screen Adjustment
Adjust the condition of the viewfinder screen.
Brightness:Adjust the BRIGHT control.
Contrast: Adjust the CONTRAST control.
Contour: Adjust the PEAKING control.
PEAKING control
CONTRAST control
BRIGHT control
PEAKING CONTRAST BRIGHT
1.
Set the POWER switch of the camera to “ON”. A picture will appear in the
viewfinder.
1.
Set the POWER switch of the camera to “ON”.
2.
Set the OUTPUT switch of the camera to “BAR”.
3.
Turn the viewfinder BRIGHT and CONTRAST controls to adjust the picture
brightness and contrast.
Turning the PEAKING control makes the picture appear sharper.
A sharper picture facilitates focusing the lens.
2.
Turn the diopter adjustment ring to adjust the diopter so that the viewfinder picture
can be clearly seen.
Diopter Adjustment Ring
01.21G/27G英(17)06.4.611:50ページ12
To Next Page
Loading...
