E-8
ENGLISH
For cameras compatible with the standard slide rail
Detaching the Viewfinder
3.
While pulling up the viewfinder stopper, remove the viewfinder by sliding it in the
direction of the arrow.
4.
Release the viewfinder cable and mic cable from the cable clamps, and disconnect
the cables.
2.
Loosen the viewfinder left-right position anchoring ring.
1.
Confirm that the POWER switch of the camera is “OFF”.
Viewfinder stopper
Tighten the ring.
01.21G/27G英(17)06.4.611:50ページ8