Panasonic Aquarea WH-ADC0309J3E5C - Initialization

202 Aquarea air-to-water heat pumps - Planning and installation manual - 02/2022
Appendix
8
19
EN
Initialization
Before starting to install the various menu settings, please initiate the Remote Controller by selecting the language of
operation and installing the date and time correctly�
When power is turned on for the rst time, it becomes the setting screen automatically. It can also be set from personal
setting of the menu�
Selecting the language
LCD blinking
Wait while the display is initializing.
When initializing screen ends, it turns to
normal screen.
When any button is pressed, language
setting screen appears.
1
Scroll with
and to select the language.
2
Press
to conrm the selection.
Setting the clock
1
Select with
or how to display the time,
either 24h or am/pm format (for example, 15:00
or 3:00 pm).
2
Press
to conrm the selection.
3
Use
and to select year, month, day, hour
and minutes. (Select and move with and
press to conrm.)
4
Once the time is set, time and day will appear
on the display even if the Remote Controller is
turned OFF.
3 Temperature of each zone
4 Time and day
5 Water Tank temperature
6 Outdoor temperature
7 Sensor type/Set temperature type icons
Water Temperature
→Compensation curve
Water Temperature
→Direct
Pool only
Room Thermostat
→External
Room Thermostat
→Internal
Room Thermistor
Remote Controller buttons and display / Initialization