211
Aquarea air-to-water heat pumps - Planning and installation manual - 02/2022
Appendix
8
Menus
For installer
Menu Default Setting Setting Options / Display
Yes After selecting the tank T ON temperature
5 °C
Set
T OFF
temperature
Yes After selecting the tank T ON temperature T OFF temperature
5 °C
Set Antifreeze
temperature
Yes After selecting the tank T ON temperature T OFF temperature
After setting the antifreeze temperature
80 °C Set Hi limit
5.12
External error signal
No
5.13
Demand control
No
5.14
SG ready
No
Yes
120 %
Capacity (1) & (2)
of DHW (in %),
Heat (in %) and
Cool (in °C)
5.15
External compressor SW
No
5.16
Circulation liquid
To select whether to circulate
water or glycol in the system�
Water
To Next Page
Loading...
