216 Aquarea air-to-water heat pumps - Planning and installation manual - 02/2022
Appendix
8
Menu Default Setting Setting Options / Display
Tank heat up time (max)
1:00
Maximum time for
heating the tank
(in hours and minutes)
Tank re-heat temp.
-8 °C
Set temperature to
perform reboil of tank
water�
Sterilization
Monday
Sterilization may be
set for 1 or more days
of the week�
Sun / Mon / Tue /
Wed / Thu / Fri / Sat
Sterilization: Time
12:00
Time of the selected
day(s) of the week to
sterilize the tank
0:00 ~ 23:59
Sterilization: Boiling temp.
65 °C
Set boiling
temperatures for
sterilize the tank�
Sterilization: Ope. time (max)
0:10
Set sterilizing time
(in hours and minutes)
7 Installer setup Service setup
7.1
Pump maximum speed
To set the maximum speed of
the pump�
Setting the ow rate, max. duty and operation
ON/OFF of the pump�
Flow rate: XX:X L/min
Max� Duty: 0x40 ~ 0xFE,
Pump: ON/OFF/Air Purge
To Next Page
Loading...
