SPECIFICATIONS
[AW-RP501]
Source Voltage : 12 V DC (DC jack)
Power Consumption : 12V, 0.7A
Video Input : 1.0 V[p-p] composite/75Ω (BNC connector)
Genlock Input : black burst
75 Ω loop through with auto terminator (BNC connector)
Video Output : 1.0 V[p-p] composite/75 Ω x 2 (BNC connector)
S-video Output : Y: 0.7 V[p-p] (75 Ω)
C: 0.3 V[p-p] burst level chrominance/75 Ω (S-VIDEO connector)
Genlock Output : 75 Ω (BNC connector)
Camera Control Output : Control signal (BNC connector)
Pan/tilt Control Output : Control signal (RJ-45 8P modular jack)
System Tally Input : Tally signal (2 pin Terminal block)
Auxiliary Control Input : Control signal (8 pin DIN connector)
Switches : Power ON/OFF Switch, GAIN HIGH/MID/LOW Switch, GAIN AGC/MANU Switch,
MODE BAR/CAM switch SHUTTER Switch, AUTO/ATW ATW switch, AUTO/ATW A switch,
AUTO/ATW B switch, AWC Switch, ABC Switch, G/L PHASE ON/OFF Switch,
G/L PHASE Coarse Switch, IRIS AUTO/MANU Switch, MEMORY Switch, PRESET Switch,
DEF Switch, WIP Switch, H/F Switch, EXT Switch, ND Switch, OP Switch, SPEED Switch,
SPEED SW CHANGE Switch, ZOOM REVERSE Switch, ZOOM/FOCUS EXCHANGE Switch,
FOCUS REVERSE Switch, TILT REVERSE Switch, PAN REVERSE Switch
Controls : T. PED Control, G/L PHASE SC Control, G/L PHASE H Control, CABLE COMP Y Control,
CABLE COMP C Control, IRIS LEVEL Control, ZOOM Lever, FOCUS Lever, PAN/TILT Lever
Pan/tilt Head Connecting
Cable : x 4 (Coaxial Cable 3 pcs., 10BASE-T straight cable 1 pc.)(In case of using G/L function)
Maximum cable length : 500 m (In case of using coaxial cables 5C-2V and 10BASE-T cable UTP category-5)
Operating temperature : −10°C to +45°C (14°F to +113°F)
Dimensions : 210 (W) x 88 (H) x 177 (D) mm [8-1/4" (W) x 3-1/2" (H) x 7" (D)]
Weight : 2.2 kg (4.9 lbs.)
Finish : AV Ivory painting
Hyblid Control Panel / Multi Hyblid Control Panel
AW-RP501/AW-RP505
ORDER NO. BSD9803029C8
C 1998 Matsushita Communication Industrial Co., Ltd.
All rights reserved. Unauthorized copying and
distribution is a violation of law.
AW-RP501 AW-RP505