EasyManua.ls Logo

Panasonic C-D3100ZM-S - Page 16

Panasonic C-D3100ZM-S
134 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
a
SSCS
Compose
your
picture
in
the
eyepiece
so
that
the
main
subject
appears
in
the
focusing
frame.
The
camera
will
automatically
focus
on
this
subject.
To
focus
on
off-center
subjects,
see
the
“Focus
lock”
section.
Indicator
LED
Red
LED
LED
lit:
The
flash
is
not
yet
fully
charged.
Green
LED
LED
lit:
Ready
to
take
a
picture.
Quickly
blinking:
The
subject
is
too
close.
Slowly
blinking:
Camera
shake
warning.
When
the red
LED
lit,
it
means
that
the
flash
is
not
yet
fully
charged.
Remove
your
finger
from
the
shutter
release
button,
wait
for
the
red
LED
to
go
out,
and
the
shutter
release
button
to
take
a
flash
picture.
When
the
green
LED
blinks
quickly,
it
means
waming
that
the
subject
is
closer
than
0.8
m
and
will
be
out
of
fascus.
In
this
case,
move
back
slightly
and
try
again.
However,
when
the
subject
closer
than
approx,
0.25
m
to
the
camera,
the
green
LED
does
not
blink
as
a
warning.
When
the
subject
is
located
in
0.8
-
1.2
m
from
the
camera,
the
part
above
the
Parallax
correction
marks
will
not
be
taken
in
the
picture.
Parallax
correction
marks
(0.8-1.2m)
Focusing
frame
Parallax
Autolokusrahmen
(0,8
-
1,2
m)
Cadre
de
mise
Repères
su
point
de
correction
de
parallaxe
(0,8
-
1,2
m)

Related product manuals