Panasonic CF-20 series User Manual (English)

Other manuals for Panasonic CF-20 series

Operating Instructions And Reference Manual179 pages

Operating Instructions28 pages

Questions and Answers:

E
Edward MillerAug 22, 2025
What to do if my Panasonic CF-20 Laptop cannot connect to a network?
- A
  anthonystevensAug 22, 2025
  To resolve the issue of being unable to connect your Panasonic Laptop to a network, first ensure that airplane mode is turned off. To do this, go to Start, then Settings, then Network & Internet, and finally Airplane mode. Click Airplane mode to set it to Off, and then ensure Wi-Fi is set to On for wireless LAN. Restart your computer after making these changes. Additionally, set the device (Tablet LAN / Wireless LAN) to [Enabled] in the [Advanced] menu of the Setup Utility.
D
Dr. Vanessa DavisAug 23, 2025
Why is my Panasonic Laptop not detecting the access point?
- R
  richard80Aug 23, 2025
  If your Panasonic Laptop isn't detecting the access point, try shortening the distance between your computer and the access point, and then try the detection again. Also, confirm the following settings: ensure that Wireless LAN is enabled in the Advanced menu of the Setup Utility and that Wireless LAN of Wireless Configuration is set to Enabled. Confirm that Airplane mode is off and Wireless LAN (Wi-Fi) is ON. This computer uses channels 1 through 11 when using IEEE802.11b/g/n. Check the channel being used by the access point.
C
Christopher GarciaAug 25, 2025
How to check the MAC address on a Panasonic CF-20 Laptop?
- P
  Paul HuntAug 25, 2025
  To check the MAC address of your Panasonic Laptop, follow these steps: First, right-click Start and select Windows PowerShell. Then, input "getmac /fo list /v" and press Enter (ensure there's a space between "fo" and "list", and between "list" and "/v"). For the Wireless LAN MAC address, note the 12-digit alphanumeric string displayed on the PhysicalAddress line of Wi-Fi. For the Wired LAN MAC address, note the 12-digit alphanumeric string displayed on the PhysicalAddress line of Ethernet. Finally, input "exit" and press Enter.
D
Dana Robinson DVMAug 27, 2025
What to do if my Panasonic CF-20 Laptop cannot start up and the power indicator is off?
- G
  Gloria IngramAug 27, 2025
  First, connect the AC adapter and ensure a fully charged battery is inserted. If that doesn't work, remove both the battery pack and AC adapter, then reconnect them. If the battery indicator remains off, the AC adapter protection might be active; disconnect the AC cord, wait at least three minutes, and reconnect it. Also, disconnect any devices connected to the USB port or disable [Tablet USB Port] or [Legacy USB Support] in the Setup Utility's Advanced menu. Finally, try pressing ?Fn? + ?F8? to turn off concealed mode.
M
Megan SwansonAug 27, 2025
How to fix no display on Panasonic CF-20?
- J
  Jodi GuzmanAug 27, 2025
  If there is no display on your Panasonic Laptop, the external display may be selected. Press ?Fn?+ ?F3? or ? ?+ ?P? to switch the display and then click the display mode. When using an external display, check the cable connection, ensure the display is turned on, and verify the external display settings.
T
Tyler EvansAug 29, 2025
Why is my Panasonic CF-20 Laptop screen so dark?
- B
  Brianna Roberts DDSAug 29, 2025
  The screen may appear darker when the AC adapter is not connected. Press ?Fn?+ ?F2? to adjust the brightness. Keep in mind that increasing brightness will also increase battery consumption.
T
terri15Aug 30, 2025
What to do if my Panasonic CF-20 Laptop cannot resume?
- T
  timothythomasAug 30, 2025
  If your Panasonic Laptop cannot resume, press the power switch to turn on the computer. Note that any unsaved data will be lost. This issue might occur if the AC adapter or battery pack was disconnected in sleep mode, a peripheral was connected or disconnected, or the power switch was held for four seconds or longer to forcibly turn off the computer. An error may also occur if the computer automatically enters sleep or hibernation while the screensaver is active; in this case, turn off the screensaver or change its pattern.
J
John WestSep 1, 2025
Why does my Panasonic CF-20 Laptop not resume?
- E
  Elizabeth LewisSep 1, 2025
  If you press and hold the power switch for 4 seconds or longer, the power will be turned off forcibly and the computer will not resume. In this case, all unsaved data will be lost. Also, the computer will not resume if you disconnected the AC adapter and the battery pack while the computer was in sleep. If the computer's power supply is disconnected in sleep, unsaved data will be lost and the computer will not resume. The battery may also be exhausted, as sleep or hibernation consume some power.
S
Sandra AtkinsonSep 2, 2025
What to do if my Panasonic CF-20 Laptop Windows does not shut down?
- S
  Sonya RamirezSep 2, 2025
  If your Panasonic Laptop's Windows is not shutting down, remove any connected USB devices. Then, wait for one or two minutes. This is not a malfunction.
M
Mr. Jonathon GreeneSep 3, 2025
Why can't my Panasonic CF-20 Laptop enter sleep or hibernation?
- D
  dorisbenitezSep 4, 2025
  If your Panasonic Laptop cannot enter sleep or hibernation, try removing USB devices temporarily. If the problem persists, restart the computer. Note that it may take one or two minutes to enter sleep or hibernation, and the computer does not enter these modes immediately after resuming; wait approximately one minute.

Panasonic CF-20 series Specifications

General

Operating System	Windows 10 Pro
Display	10.1" WUXGA (1920 x 1200)
RAM	16GB
Storage	Up to 512GB SSD
Durability	MIL-STD-810G
Device Type	2-in-1
Graphics	Intel HD Graphics
Wireless	Wi-Fi 802.11ac
Bluetooth	Bluetooth 4.2
Ports	USB 3.0, HDMI, Ethernet
Dimensions	275 x 211 x 24.5 mm (10.83 x 8.31 x 0.96 inches)