Panasonic CF-31GT2AXDE

Questions and Answers:

C
chenkaraSep 2, 2025
Why does the message “Remove disks or other media. Press any key to restart” appear on my Panasonic Desktop?
- S
  Stephanie JohnstonSep 2, 2025
  If the message “Remove disks or other media. Press any key to restart” appears, and you have a floppy disk in the drive, remove the floppy disk and press any key. If a device is connected to the USB port or the ExpressCard slot, disconnect the device, or set [USB Port] or [Legacy USB Support] or [ExpressCard Slot] to [Disable] in the [Advanced] menu of the Setup Utility. If the problem persists after removing the disk, it may be a hard disk failure, so contact Panasonic Technical Support.
M
Monica ThompsonSep 14, 2025
What to do when using a conventional port replicator on Panasonic Desktop?
- K
  Keith TuckerSep 14, 2025
  When using a conventional port replicator with your Panasonic Desktop, refer to the following cautions instead of the ones in Reference Manual 'Port Replicator / Car Mounter'. Use CF-AA5713A or CF-AA1653A. If you use an AC adaptor other than the above, the computer may become battery operation state, the battery indicator may blink red, etc. The CPU clock rate is lowered. If you connect a conventional port replicator to the computer while the computer is turned on, a message that prompts you to restart the computer will appear. Follow the instructions, and restart the computer.
M
Marcus DavisAug 31, 2025
What to do if my Panasonic Desktop shows 'Remove disks or other media'?
- D
  David CampbellAug 31, 2025
  If your Panasonic Desktop displays “Remove disks or other media. Press any key to restart”, it may be due to a floppy disk in the drive without system startup information. Remove the floppy disk and press any key. If a device is connected to the USB port, disconnect the device, or set [USB Port] or [Legacy USB Support] to [Disabled] in the [Advanced] menu of the Setup Utility. If a device is connected to the ExpressCard slot, disconnect the device, or set [ExpressCard Slot] to [Disabled] in the [Advanced] menu of the Setup Utility. If the problem persists after removing the disk, it may be a hard disk failure, in which case you should contact Panasonic Technical Support. You can also try to set [UEFI Boot] to [Disabled] in the [Boot] menu of the Setup Utility.
S
sheila52Sep 18, 2025
Why doesn't the password screen appear on my Panasonic Desktop after sleep mode?
- B
  brian66Sep 18, 2025
  If the '[Enter Password]' screen does not appear when resuming your Panasonic Desktop from sleep or hibernation, enable '[Password On Resume]' in the '[Security]' menu of the Setup Utility. Alternatively, the Windows password can be used. You can also add a password by displaying 'Charm' and clicking - [Change PC settings] - [Accounts], then clicking [Sign-in options], and clicking [Add] under 'Password'. Another way is to click [Control Panel] - [System and Security] - [Power Options] - [Require a password on wakeup], and add a check mark for [Require a password].
M
Mitchell TorresSep 16, 2025
What to do if I forgot my Panasonic Desktop password?
- K
  Kevin CamposSep 16, 2025
  If you've forgotten your password for your Panasonic Desktop, you can contact Panasonic Technical Support. If you have a password reset disk, use it to reset the administrator password. If you do not have a password reset disk, reinstall and set up Windows, and then set a new password.
K
Katherine MilesSep 23, 2025
Why is one screen disordered during simultaneous display on my Panasonic CF-31GT2AXDE Desktop?
- G
  gina26Sep 23, 2025
  If one of the screens becomes disordered during simultaneous display on your Panasonic Desktop, when using the Extended Desktop, use the same display colors for the external display as those used by the LCD. If problems persist, try changing the display. Note that simultaneous display cannot be used until Windows startup is complete.
P
Paul FernandezAug 27, 2025
What to do if the cursor does not work on Panasonic CF-31GT2AXDE Desktop?
- M
  millermarcusAug 28, 2025
  If the cursor does not work on your Panasonic Desktop, connect the external mouse correctly (if you are using one). Restart the computer using the keyboard. If the computer does not respond to keyboard commands, refer to “No response”.
I
Ian LopezAug 27, 2025
What to do if one of the screens becomes disordered on Panasonic CF-31GT2AXDE?
- H
  hhowardAug 27, 2025
  When using the Extended Desktop on your Panasonic Desktop, use the same display colors for the external display as those used by the LCD. If you continue to experience problems, try changing the display.
C
Cynthia TurnerAug 26, 2025
Why is the screen disordered on my Panasonic CF-31GT2AXDE?
- J
  James McdanielAug 27, 2025
  If the screen is disordered on your Panasonic Desktop, restarting the computer may help, as changing the number of display colors and resolution, or connecting/disconnecting an external display may affect the screen.
S
Sandra TaylorAug 25, 2025
Why is the screen dark on my Panasonic CF-31GT2AXDE?
- S
  sanchezgregoryAug 26, 2025
  If your Panasonic Desktop screen is dark, especially when the AC adapter is not connected, press Fn + F2 and adjust the brightness. Also, press Fn + F8 to turn off the concealed mode.