Getting Started
15
1
Insert the battery pack
Place the new battery pack so that it fits the mark (A) on
the keyboard base body and slide it in parallel in the direction of
the arrow and attach it.
n
To remove the battery pack
While sliding the left and right latches (B) to the unlocked posi
-
tion
, push out the battery pack in parallel with the computer.
CAUTION
l
Make sure the battery pack is securely locked. If not, the bat-
tery pack may fall when you carry the computer.
l
Do not touch the terminals of the battery pack and the com-
puter. Doing so can make the terminals dirty or damaged,
and may cause malfunction of the battery pack and the com-
puter.
2 Connect the conversion cable to the AC
adaptor, then connect your computer to a
power outlet
The battery charging starts automatically.
CAUTION
l
Do not disconnect the AC adaptor until the first-time opera-
tion procedure is completed.
l
When using the computer for the first time, do not connect
any peripheral device (including wired LAN cable) except the
battery pack and AC adaptor.
l
Handling the AC adaptor
Problems such as sudden voltage drops may arise during
periods of thunder and lightning. Since this could adversely
affect your computer, an uninterruptible power source (UPS)
is highly recommended unless running from the battery pack
alone.
l
When the DC plug is not connected to the computer, dis-
connect the AC cord from your electrical outlet. Power is
consumed simply by having the AC adaptor plugged into an
electrical outlet.
1
A
B
2
BM161_Readme(CPE03286ZA)_OI_E.indb 15 2017/07/10 11:08:24
To Next Page
Loading...
