116
SD Memory Card Security Function
z [Use when starting the computer]
• If you add the check mark:
This SD memory card can be used when starting the computer.
A check mark is also added automatically in [Use the SD card when
starting the computer]
• If you remove the check mark:
All SD memory cards currently registered on this computer will be
unusable when starting this computer
z [Use when logging on to Windows]
• If you add the check mark:
This SD memory card can be used when logging on to Windows
• If you remove the check mark:
The user name and password will be erased from the SD memory card
and the card will no longer be usable when logging on to Windows
z [User name and password]
• You can change the Windows log-on user name and password which are
set in the SD memory card.
• When the set user name appears, enter the password and click [OK]. Then
enter the new user name and password
• [User name and password] can not be selected if the check mark is not
added to [Use when logging on to Windows]
3 Click [OK].
Operation differs, depending on the setting.
z If you add the check mark for [Use the SD card when starting the computer]:
Step C of [To use when starting the computer] in step
6 (Î page 112)
z If you remove the check mark for [Use the SD card when starting the computer]:
A Enter the password and click [OK].
B At the confirmation message [The SD card information registered in the Setup
Utility will be erased...], click [Yes].
z If you add the check mark for [Use when logging on to Windows]:
Step C of [To use when logging on to Windows] in step
6 (Î page 113)
z If you remove the check mark from [Use when logging on to Windows]:
A Enter the password and click [OK].
To Next Page
Loading...
