145
Wireless LAN
B Select again a profile name you want to connect, and click [Connect].
z When the computer is properly connected to an access point, the icon will disap-
pear. (Î page 175)
7 Click [Close].
To communicate between two computers using the wireless LAN and without using an
access point, make the following settings on each computer.
z Set the network to be accessed as [Device to device (Ad hoc)]
z Set the network names to the same name
z Set the network authentication to the same authentication
z When using encryption, set the same encryption and the same network key on both
computers
Exchanging Data between Computers Using the Wireless LAN
To Next Page
Loading...
